Extrusion bond strength and disinfection of E. faecalis from canal dentin using synchronized microbubble photodynamic activation and photon-induced photoacoustic streaming.

OBJECTIVE: This study aimed to assess the antimicrobial effectiveness of a new disinfection regimen Curcumin photosensitizer (CP), Synchronized Microbubble Photodynamic Activation (SYMPA), Photon-induced photoacoustic streaming (PIPS), and its impact on the extrusion bond strength (EBS) of root filling material to canal dentin. MATERIALS AND METHODS: Root canal treatments of sixty mandibular incisors were performed, and an overnight culture of E. faecalis was cultivated in the BHI medium. A volume of 1 mL was introduced into twenty root canals. All the samples were randomly allocated into 4 groups based on the irrigation used: -Group 1: 2.5% NaOCl+17% EDTA (Control), Group 2: CP+17% EDTA, Group 3: SYMPA+17% EDTA, and Group 4: PIPS+17% EDTA. The viable bacterial count was estimated, and 15 specimens from each group were obturated, followed by sectioning in 1-mm thick slices. The EBS was measured using a universal testing machine, and failure modes were analyzed using a stereomicroscope at 40x magnification. Means and standard deviations (SD) of the survival rate of E. faecalis and EBS of root filling to the dentin were analyzed using ANOVA Tukey multiple comparison t-tests (p=0.05). RESULTS: Group 1 (2.5% NaOCl+17% EDTA) demonstrated the highest survival rate of E. faecalis. Group 3, in which SYMPA+17% EDTA was used to sterilize the canal, unveiled the lowest survival rate (1.55±0.11 CFU/mL). Similarly, the coronal section of Group 3 specimens (8.67±0.43MPa) demonstrated the highest EBS. However, an apical section of Group 1 samples (2.81±0.11MPa) displayed the lowest outcome of bond integrity. Intergroup comparison analysis revealed that Group 4 (PIPS+17% EDTA) and Group 2 (CP+17% EDTA) samples demonstrated comparable values of bond integrity and bacterial survival. CONCLUSIONS: Canal disinfection using the synchronized microbubble photodynamic activation (SYMPA) technique proved to be a promising alternative technique in decreasing the count of E. faecalis and improving extrusion bond strength of gutta percha to canal dentin.

Did in-between rinsing and agitating with distilled water prevents precipitate formation by the interaction between sodium hypochlorite and chlorhexidine canal irrigants?

The interaction of sodium hypochlorite (NaOCl) and chlorhexidine gluconate (CHX) produces an orange-brown precipitate. The present study evaluated the influence of distilled water (H2 O) in different irrigation protocols designed to prevent the formation of precipitate with NaOCl and CHX. Fifty canine teeth were instrumented and split longitudinally. The canal was examined with a stereomicroscope and photographed by canal-thirds. The tooth halves were repositioned and distributed randomly into five groups, according to the final irrigation protocol (n = 10): G1 (control)-Ethylenediaminetetraacetic acid (EDTA) + NaOCl + CHX, conventional irrigation (CI); G2-EDTA + NaOCl + CHX, activated with passive ultrasonic irrigation (PUI); G3-EDTA (PUI) + NaOCl (PUI) + H2 O (CI) + CHX (PUI); G4-EDTA + NaOCl + H2 O + CHX (PUI); G5-EDTA (PUI) + NaOCl (PUI) + H2 O (continuous ultrasonic irrigation [CUI]) + CHX (PUI). The specimens were evaluated with a stereomicroscope and scanning electron microscope (SEM). Energy dispersive x-ray spectroscopy analysis was performed to identify the elemental profile of the irrigated canal walls. The images were scored according to the extensiveness of precipitate. Data were analyzed (Kruskal-Wallis test, α = 5%). Under the stereomicroscope, G1 had significantly higher scores than all the other groups in all canal-thirds (p < .05). All four experimental groups showed similar scores (p > .05). There were no significant differences in precipitate formation among root-thirds in intragroup analysis (p > .05). Upon SEM examination, overall, only G5 had lower scores than G1 (p < .05). Analysis by canal-thirds showed no significant difference among groups and among canal-thirds in the intragroup analysis (p > .05). G1 showed high Cl peaks. In-between irrigation with H2 O activated by CUI is effective in preventing precipitate formation during canal debridement with NaOCl and CHX. RESEARCH HIGHLIGHTS: Continuous ultrasonic irrigation with distilled water was capable to prevent the precipitate formation. The precipitate can be classified as a chemical smear layer.

Efeito de diferentes irrigantes finais na resistência união de um cimento de silicato de cálcio: estudo in vitro / Effect of different final irrigants on the bond strength of a calcium silicate cement : in vitro study

Objetivo: Este estudo teve como objetivo avaliar a resistência de união do cimento Biodentine® à dentina radicular após a utilização de diferentes irrigantes finais. Método: Vinte dentes humanos extraídos tiveram seu terço médio radicular cortado em fatias que foram submersas em hipoclorito de sódio 2,5% e posteriormente divididas aleatoriamente em 4 grupos experimentais (n=15) conforme o irrigante final utilizado (1) água destilada (controle), (2) QMixTM, (3) ácido cítrico 10%, (4) EDTA 17%. Após a imersão na substância teste as amostras foram preenchidas com o cimento Biodentine e imersas em solução salina tamponada com fosfato (PBS) por um período de 7 dias. O teste de push out foi realizado e os valores de resistência de união em Mpa foram obtidos. Os dados foram analisados pelos testes de Kruskal Wallis e Studend- Newman-Keuls. Resultados: Os piores valores de união foram obtidos após a utilização do EDTA enquanto a água destilada, o QMix e o ácido cítrico apresentaram resultados estatisticamente semelhantes entre si. Conclusão: A remoção da smear layer não resultou em melhora nos resultados de união do cimento Biodentine.(AU)

Objective: This study aimed to evaluate the bond strength of Biodentine® cement to root dentin after the use of different final irrigants. Method: Twenty extracted human teeth had their middle root third cut into slices that were submerged in 2.5% sodium hypochlorite and then randomly divided into 4 experimental groups (n=15) according to the final irrigant used (1) distilled water (control), (2) QMixTM, (3) 10% citric acid, (4) 17% EDTA. After immersion in the test substance the samples were filled with Biodentine cement and immersed in phosphate buffered saline (PBS) for a period of 7 days. The push out test was performed and the bond strength values in MPa were obtained. The data were analyzed by Kruskal Wallis and Studend- Newman-Keuls tests. Results: The worst bond values were obtained after using EDTA while distilled water, QMix and citric acid showed statistically similar results to each other. Conclusion: Removal of the smear layer did not result in improved bonding results of Biodentine cement.(AU)

Effect of calcium hypochlorite and sodium thiosulfate on the bond strength to pulp chamber dentin: A laboratory investigation.

This study aimed to compare the effect of sodium hypochlorite (NaOCl) and calcium hypochlorite [Ca(OCl)2 ] on the bond strength to pulp chamber dentin when followed or not by the use of sodium thiosulfate (Na2 S2 O3 ). The pulp chamber of fifty human molars were divided into five groups (n = 10) according to the immersion protocol: 2.5% NaOCl; 2.5% NaOCl + 5% Na2 S2 O3 ; 2.5% Ca(OCl)2 ; 2.5% Ca(OCl)2 + 5% Na2 S2 O3 ; and 0.9% sodium chloride (NaCl; control). Subsequently, the samples were restored with resin composite. Three sticks each were obtained and subjected to microtensile testing. SEM/EDS analyses of the pulp chamber roof (n = 8) were carried out for mineral quantification. Elemental analysis data were investigated via one-way ANOVA and Tukey's post hoc, and bond strength data by post hoc pairwise comparisons using the Kruskal-Wallis test. Use of 2.5% NaOCl was associated with the lowest value of bond strength, while 2.5% Ca(OCl)2 had similar bond strength to that of the 0.9% NaCl control. Using 5% Na2 S2 O3 was able to increase the bond strength after 2.5% NaOCl, but not after 2.5% Ca(OCl)2 . The group treated only with 2.5% Ca(OCl)2 had a higher Ca/P ratio on the dentin surface. Dentin treated with Ca(OCl)2 was not affected by Na2 S2 O3 and showed bond strength similar to the 0.9% NaCl.

Interactions Between Calcium Hypochlorite and Irrigants Commonly Used in Endodontic Practice: A Chemical Analysis.

INTRODUCTION: This study aimed to identify possible products resulting from chemical interactions between calcium hypochlorite (Ca[OCl]2) and other irrigants for endodontic use using electrospray ionization quadrupole time-of-flight mass spectrometry. METHODS: The 5.25% Ca(OCl)2 was associated with either 70% ethanol solution, distilled water, saline solution (0.9% sodium chloride), 5% sodium thiosulfate, 10% citric acid, 17% ethylenediaminetetraacetic acid (EDTA), or 2% chlorhexidine (CHX). The reaction ratio was 1:1 and the products obtained were analyzed by electrospray ionization quadrupole time-of-flight mass spectrometry. RESULTS: The interactions between Ca(OCl)2 and CHX generated an orange-brown precipitate, without identification of para-chloroaniline and between Ca(OCl)2 and sodium thiosulfate, a milky-white precipitate. Furthermore, when the oxidizing agent was associated with EDTA and citric acid, chlorine gas was released. As for the other associations, 70% ethanol, distilled water, and saline solution, no precipitation or gas release occurred. CONCLUSIONS: The orange-brown precipitate occurs due to the chlorination of guanidine nitrogens, and the milky-white precipitate is due to the partial neutralization of the oxidizing agent. The release of chlorine gas occurs due to the low pH of the mixture, which results in the rapid formation and decomposition of chlorine. In this context, an intermediate rinsed with distilled water, saline solution, and ethanol between Ca(OCl)2 and CHX, citric acid, and EDTA seems to be appropriate to prevent the formation of by-products when these irrigants need to be used in the canal. Furthermore, if it is necessary to use sodium thiosulfate, a larger volume of the solution must be used compared to that used for the oxidizing solution.

Final irrigation protocols can be used to promote stable long-term bond strength of AH Plus to dentin.

Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 - 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 - 2.5% NaOCl + 17% EDTA; G3 - 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G4 - 2.5% NaOCl + 17% EDTA + 2% chlorhexidine (CHX); G5 - mixture 5% NaOCl + 18% etidronate (HEDP); and G6 - mixture 5% NaOCl + 10% tetrasodium EDTA (Na4EDTA). After irrigation, one root/group was split and images were obtained by scanning electron microscopy (SEM). The other 20 roots/group were filled with only AH Plus sealer. Three slices/root were used for push-out assessment seven days and 20 months after obturation. One-way analysis of variance and Tukey (α<0.05) were used to compare the results among experimental groups, and unpaired t-test (α<0.05) was used to compare the results of the same group over time. The photomicrographs showed that, excepting G1, all groups completely removed the smear layer from the samples. In G2 and G4, the opening of the dentin tubules enlarged. In G3, erosion was observed in the peritubular and intertubular dentin. Values of the BS in the seven days were G2=G3=G4=G5>G6=G1 and in the 20 months were G3=G5>G6=G4>G1=G2. G3, G5, and G6 presented values of BS in 20 months similar to the values of seven days (P>0.05). The final irrigation protocols tested produced dentin surfaces with different characteristics. Only G3 and G5 presented high BS values that were stable over time.

Push out bond strength of fiber post to radicular dentin using Q-mix, lemon/garlic extract, and riboflavin activated by photodynamic therapy as a final canal irrigant.

OBJECTIVE: The aim of this study was to assess the extrusion bond values of fiber post to radicular dentin when disinfected using different final irrigants lemon garlic extract (LGE), riboflavin (RFP) activated by PDT (photodynamic therapy), and Q-mix 2-in-1. MATERIALS AND METHODS: Forty single-rooted mandibular premolar teeth were decoronated. Endodontic treatment was performed, and the canals were continually irrigated with normal saline, dried with paper points, and obturated. Post space was prepared by removing gutta-percha using peso-reamers. All specimens were randomly allocated into four groups based on the final irrigant used. Specimens in Group 1 irrigated with: 5.25% NaOCl+17% EDTA, group 2: 5.25% NaOCl+Q-mix 2-in-1, group 3: 5.25% NaOCl+RFP, and group 4: 5.25% NaOCl+LGE. Following final irrigation, a fiber post was placed in the canal space and luted. Samples were sectioned and each section was placed in a universal testing machine to assess bond values. Debonded samples were assessed for failure modes, EBS and modes of failure. For comparisons among groups, the one-way analysis of variance (ANOVA) test and the Post-Hoc Tukey HSD test were used keeping the level of significance at p=0.05. RESULTS: The cervical section of samples in group 2 (NaOCL+Qmix) (7.11±0.81 MPa) exhibited the maximum value of EBS. However, the apical section of samples in group 3 (5.25% NaOCl+RFP) (3.33±0.26 MPa) displayed minimum extrusion bond values. Group 3 specimens in which final irrigation was performed with RFP established significantly lower bond integrity values than all the other investigated groups coronal (3.77±0.13 MPa), middle (3.60±0.41 MPa), and apical (3.33±0.26 MPa) (p<0.05). Intragroup comparison analysis, the coronal and middle root sections of all the experimental groups displayed comparable outcomes of EBS (p>0.05). However, near the apical section of the root, the bond strength of all the groups declined considerably. CONCLUSIONS: Q-mix 2-in-1 as the final irrigant displayed the highest extrusion bond strength of fiber-reinforced composite to canal dentin at all three levels coronal, middle and apical. Lemon garlic extract has the potential to be used alternative to ethylene diamine tetra acetic acid as a final irrigant.

In Vitro Dental Discoloration Provoked by Intracanal Calcium Silicate-based Dressing Used for Regenerative Endodontic Procedures: An One-year Spectrometric Analysis.

INTRODUCTION: Regenerative endodontic procedures provide conditions for the continuity of apical formation and increase of the dentin wall thickness, being a useful technique to resume root development of necrotic teeth with incomplete apex. This study aimed to evaluate the coronal discoloration promoted by a new intracanal calcium silicate-based dressing and compare it with other intracanal dressings used in regenerative endodontic procedures. METHODS: Sixty bovine incisors were prepared to simulate teeth with incomplete apexes and divided according to the intracanal dressing used: triple antibiotic paste-double antibiotic paste-DAP, calcium hydroxide associated with 2% chlorhexidine gel, calcium hydroxide associated with saline solution, and Bio-C Temp. As control, no dressing was performed. The intracanal dressings remained in the simulated root canal for 21 days. Luminosity (ΔL) and color difference (ΔEab and ΔE00) were evaluated using long-term (1 year) spectrophotometric analysis. The results were analyzed using the ANOVA test with Tukey post hoc with a significance of 5%. RESULTS: Triple antibiotic paste showed the highest values of ΔEab and ΔE00 and lowest values of ΔL (P < .05). Bio-C Temp showed higher ΔEab than the other groups from 6 months (P < .05), higher ΔE00 and lower ΔL after 1 year (P < .05). CONCLUSIONS: Bio-C Temp induced noticeable coronary discoloration after the 1-year analysis.

Effect of different root canal irrigants on push-out bond strength of two novel root-end filling materials.

BACKGROUND: The aim of this in vitro study was to evaluate push-out bond strength of different root-end filling materials using various irrigant solutions. METHODS: A push-out bond strength test was performed to evaluate the bond strength of two experimental root-end filling materials: namely, nano-hybrid mineral trioxide aggregate (MTA) and polymethyl methacrylate (PMMA) cement filled with 20% weight nano hydroxyapatite (nHA) fillers compared to conventional MTA. The irrigant solutions employed were sodium hypochlorite (NaOCl) in concentrations 1%, 2.5% and 5.25% and 2% chlorhexidine gluconate (CHX) followed by application of 17% ethylene diamine tetra-acetic acid (EDTA). A freshly extracted sixty single-rooted human maxillary central incisors were used. The crowns were removed, the canal apex was widened to simulate immature teeth. Each type of irrigation protocols was performed. After application and setting of the root-end filling materials, a slice of one mm thickness was cut transversely from the apical end of each root. Specimens were stored for 1 month in artificial saliva and were subjected to a push-out test to evaluate the shear bond strength. Data were analyzed using two-way ANOVA and Tukey test. RESULTS: The experimental nano-hybrid MTA showed the highest significant push-out bond strength values when irrigated by NaOCl at several concentrations (1%, 2.5% and 5.25%) (P< 0.05). Meanwhile, irrigation with 2% CHX resulted in highest bond strength values in nano-hybrid white MTA (18 MPa) and PMMA filled with 20% weight nHA (17.4 MPa) with nonsignificant difference between them (p = 0.25). In each root-end filling material, irrigation with 2% CHX led to the highest significant bond strength, followed by NaOCl 1%, while the least significant bond strength was produced after irrigation with NaOCl 2.5% and 5.25% (P< 0.05). CONCLUSION: Considering the limitations of this study, it may be concluded that the application of 2% CXH and 17% EDTA provides superior push-out bond strength to root canal dentin compared with irrigation with NaOCl irrigants and 17% EDTA, experimental nano-hybrid MTA root-end filling material provides enhanced shear bond strength than conventional micron-sized MTA root-end filling material.

[Adhesive bonding on the endodontically treated tooth]. / Adhesieve hechting aan het endodontisch behandelde gebitselement.

Endodontic irrigants negatively influence the physical properties of dentine. The effect of sodium hypochlorite and ethylenediaminetetraacetic acid (EDTA) on the bond strength to dentine was investigated in a systematic review. Inclusion criteria were the following: a microtensile or microshear test, the irrigants sodium hypochlorite and/or EDTA, an irrigation time of ≥ 5 minutes of sodium hypochlorite, an irrigation protocol for endodontic treatment, human dentine, the presence of a control group and no post space preparation. Of the 188 eligible articles, 13 were suitable for inclusion. There was strong evidence that rinsing with sodium hypochlorite and also additional rinsing minutes with ethylenediaminetetraacetic acid leads to minimum bond strength to dentin for a two-step self-etching adhesive. For a two-step etch-and-rinse adhesive, the bond strength is approximately significant after rinsing with sodium hypochlorite (rinsing time: 10-60 minutes).

Advances in the Role of Sodium Hypochlorite Irrigant in Chemical Preparation of Root Canal Treatment.

Irrigation of root canal system is of great significance to the success of endodontic treatment, where sodium hypochlorite (NaOCl) is the most widely used irrigant in chemical preparation. NaOCl functions by eliminating bacterial biofilms and dissolving organic tissue, which may vary according to several factors such as the microbiology of root canal infection and the concentration of the irrigant. It has been proposed that the effectiveness of NaOCl could be enhanced via several methods, including heating the irrigant, applying in conjunction with certain reagents, or activating by agitation techniques. Despite its antibacterial and tissue-dissolving capacities, NaOCl should be used with caution to avoid detrimental effect due to its cytotoxicity and negative effect on dentin properties. In this narrative review, we discussed the factors that affect the properties of NaOCl, the methods to improve its efficacy, and the side effects that might occur in clinical practice.

Update on citric acid use in endodontic treatment: a systematic review.

This systematic review aims to analyse the available evidence concerning the use of citric acid (CA) in endodontics treatment and to assess its results in terms of different considerations: effect on smear layer removal, influence on sealer bond strength, activation effect by means of sonic or ultrasonic devices, effects on dentine surface, antibacterial activity, and effectiveness boost for regenerative procedures, releasing growth factors from dentin. To evaluate the results of CA as a final irrigant and compare them to other chelating agents. This review followed the PRISMA checklist. An electronic search was conducted in MEDLINE (OVID), Scopus (Elsevier) and the Web of Science (Thomson Reuters) databases. Risk of bias of included studies was evaluated using the modified CONSORT checklist and the PRIRATE checklist 2020 guidelines. 39 studies fulfilled the eligibility criteria to be included in this review: 27 in vitro studies using extracted human teeth, 10 in vitro studies using human dentin disks, and 2 RCT. Citric acid has proven to be effective in smear layer removal, showing better results in coronal and middle root thirds, improving its effect when combined with manual dynamic activation. There is no agreement regarding citric acid effect on sealer adhesion and adaptation to root canal walls due to heterogeneity within studies. Citric acid irrigation can decrease dentine microhardness and cause decalcification and erosion, especially when used before NaOCl. Citric acid has proven to be beneficial in regenerative endodontic procedures due to higher TGF-ß1 release.Trial registration: Prospero database CRD42021267055.

Evaluation of structural integrity effect on adhesion strength of root dentin with a multi-functional irrigation strategy.

OBJECTIVES: To evaluate effects of a novel auxiliary irrigation strategy, proanthocyanidin (PA) + carboxymethyl chitosan/amorphous calcium phosphate (CMC/ACP) nanocomplexes, on maintaining the organic-inorganic structural integrity and hence optimizing the adhesion strength of root dentin. MATERIALS AND METHODS: Dentin specimens (n = 150) were prepared and subjected to the classical irrigating strategy with or without PA and CMC/ACP. The ultrastructure and biomechanical behaviour of dentin were characterized by scanning electron microscopy and atomic force microscope, respectively. Forty single root-canal premolars were employed for push-out bond strength testing. Besides, the antibacterial effects against Enterococcus faecalis were evaluated with confocal laser scanning microscopy. Statistical differences were verified with one-way ANOVA and Tukey's post-tests. RESULTS: The organic-inorganic structural integrity of root dentin was repaired with the synergetic use of PA and CMC/ACP. Correspondingly, the bond stability between the root canal wall and the AH-Plus sealer was significantly reinforced (P < 0.05). Meanwhile, the tissue biomechanical properties and antibacterial behaviour were enhanced compared to that of control group (P < 0.05). CONCLUSIONS: The synergistic utilization of PA and CMC/ACP can preserve the structural integrity of root dentin, contributing to optimizing the sealing effects of root canal. Moreover, the novel irrigation strategy demonstrated a favourable antimicrobial activity. CLINICAL RELEVANCE: The combination of PA and CMC/ACP can serve as a promising auxiliary irrigation strategy to optimize the outcomes of chemical preparation, enhance the sealing effects of root canal and hence improve the success rate of treatment.

Comparison of antibacterial effect of plantaricin 149 suspension and traditional root canal irrigation solutions in root canal infections in vitro.

Dental pulp and periapical diseases are common conditions in stomatology, caused by various pathogenic microorganisms. Antimicrobial peptides, as new antibiotics, offer promising applications in the irrigation and disinfection medicaments for root canals.One patient with chronic periapical periodontitis was selected to extract the clinical pathogenic bacteria. Porphyromonas gingivalis (Pg) (ATCC 33,277), Streptococcus mutans (Sm) (ATCC 25,175), and Prevotella intermedius (Pi) (ATCC 25,611) were used as test strains. The effects of plantaricin (Pln) 149 on the biofilm formation and growth in infected root canals were evaluated by RT-PCR, laser confocal scanning microscopy, and bacterial diversity analysis. In addition, the cytotoxicity of Pln 149 (100 µg/mL) to human dental pulp stem cells (hDPSCs) was assessed using an MTT assay. Pln 149 exhibited significant inhibitory effects on Pg Sm and Pi (P < 0.05), with significant differences in the biofilm images of the laser confocal scanning microscope (P < 0.05). There were no significant differences in hDPSCs viability or proliferation between the Pln 149 and control groups. Considering the excellent antimicrobial effects and low cytotoxicity, we suggest that Pln 149 might be a promising option for root canal irrigation solutions.

The effects of different root canal irrigation protocols and artificial aging procedures on the bond strength between dentin and hybrid ceramic posts.

The purpose of this study is to investigate the effects of different root canal irrigation protocols applied to the dentin and artificial aging procedures on the micro pushout bond strength (mPBS) between dentin and hybrid ceramic posts. Seventy-five single-rooted mandibular premolar teeth were divided into 5 groups (Gr1-5). 50 of the teeth were used for the mPBS tests (n = 10), whereas 25 were used for the smear layer examinations (n = 5). Post space were prepared and irrigated with different irrigation-protocols in each group. (Gr1:[SS], Gr2:[NaOCl] + SS, Gr3:[EDTA] + NaOCl + SS, Gr4:[MA] + NaOCl + SS, Gr5:[Ch] + NaOCl + SS). Post and core pattern were fabricated with pattern resin and a fiber post, after scanning, the posts were milled with Vita Enamic resin ceramic block, and cemented. After 7 days the roots were sliced at thicknesses of 1 mm; half of them were subjected to mPBS test, while the other half were tested after undergoing mechanical cycling for artificial aging. For data analysis, the Shapiro-Wilk test was utilized to test normal distributions, 3-way analysis of variance was used to compare mPBS, and Tukey's HSD test was conducted for multiple comparisons. SEM analysis was performed for examination of failure modes and smear layer removal. Different root canal irrigation protocols affected mPBS significantly. While Gr4 had the highest mPBS, Gr1 had the lowest. Regarding to different zones, the highest mPBS was in coronal zone, and the lowest one was in the apical zone. The aging procedure also led to a statistically-significant decrease in mPBS. Most frequent failure modes were cohesive failure in dentin and mixed failure. Irrigation with 7%MA (Gr4) showed better performance than 17% EDTA (Gr3) in smear layer removal, especially at the apical zone of the tooth. This is critical for the success of root canal treatment and increased the mPBS to a higher extent in all zones of the tooth.

Comparison of the push-out bond strength of AH Plus sealer to dentin after using different herbal irrigation solutions as the final rinse.

The aim of the present study was to evaluate the push-out bond strength of AH Plus sealer to dentin treated with the essential oils of Cumimum cyminum and Cinnamomum zeylanicum as herbal final irrigants. Forty human mandibular first premolars were selected. After smear layer removal, the samples were divided into 4 groups and irrigated with experimental solutions for 1 min and later with distilled water. G1: Cinnamomum zeylanicum (CZ) in minimum inhibitory concentration (MIC); G2: Sodium hypochlorite 2.5%; G3: Sodium hypochlorite in MIC; G4: Cuminum cyminum (CC) in MIC. After obturation, the roots were sectioned in order to obtain 1-mm discs for push-out assessment. The push-out test was performed using a universal testing machine. The slices were examined using a stereomicroscope at 30× to determine the mode of failure. The data were analyzed using one-way analysis of variance and Tukey's post-hoc test. The teeth irrigated with CZ showed significantly lower push-out resistance than those irrigated with NaOCl 2.5% and NaOCl at MIC. The other groups had no significant difference. The modes of failure were predominantly mixed. Under the limitations of the present study, CC does not have adverse effects on the bond strength of AH Plus and can be used as a good alternative for currently used final irrigants.

Effect of Different Irrigants on the Adhesive Interface and Influence on the Push Out Strength of Fiber Posts.

PURPOSE: The aim of this study was to evaluate the effects of a new irrigant solution on the post space cleaning and the adhesive resistance of fiber posts. METHODS AND MATERIALS: Eighty roots of bovine teeth were randomly allocated into eight groups (n=10 for each group). Evaluations were performed in two different time points for each irrigant. The irrigants included a control group with distilled water (DW), 2.5% NaOCl and 17% EDTA (SH), 1% peracetic acid (PA), and 5% boric acid and 1% citric acid (EX). The time points were 24 hours (I-immediate) and 6 months (D-delayed). The push-out test was performed using a universal testing machine with a 5 kN load cell operating at a crosshead speed of 0.5 mm/minute. The dentinal cementation system was analyzed using a laser confocal microscope (LSM5, Zeiss, Jena, Germany), and incidence of residue on radicular dentin was evaluated by scanning electron microscopy (SEM). The incidence of residue was evaluated by the Kruskal-Wallis test and push-out bond strength and dentin penetrability were evaluated via a one-way analysis of variance (ANOVA) and Tukey tests (α=0.05). RESULTS: The EX irrigation protocol demonstrated the lowest incidence of residue on the dentin surface (p<0.05), independently of the evaluated third. In the cervical and the middle post thirds, EXI, EXD, SHI, and SHD groups exhibited similar push-out bond strength values (p>0.05). EXI, EXD, PAI, and PAD exhibited the greatest dentinal penetrability of the cementation system in all the post thirds (p<0.05). CONCLUSIONS: A solution containing 5% boric acid and 1% citric acid can be a promising irrigant for radicular post space cleaning. It has adequate potential for cleaning the dentin surface without interfering with the adhesive interface between the dentin and the cementation system.

Human root dentin microhardness and degradation by triple antibiotic paste and calcium hydroxide.

PURPOSE: To investigate and compare the effects of the two widely used regenerative endodontics medicaments: Triple antibiotic paste (ciprofloxacine-metronidazole-clindamycin) and calcium hydroxide on the microhardness and degradation of human root dentin. METHODS: Following ethical approval and subject consent to use teeth in this research study, 60 singled-rooted permanent human teeth were randomly divided into six groups:(1) Tri-antibiotic paste with distilled water, or with (2) propylene glycol, (3) calcium hydroxide with distilled water, (4) calcium hydroxide propylene glycol, (5) untreated extracted teeth as negative controls, or (6) teeth instrumented and filled with calcium hydroxide or tri-antibiotic paste as positive controls. The microhardness tests were conducted after 1 and 2 months of exposure to the medicaments using a Vickers microhardness tester. Raman spectroscopy and energy dispersive x-ray spectroscopy were used to evaluate the chemistry and structure of the root dentin. RESULTS: There were differences in the dentin microhardness following treatment with the medicaments or controls (P< 0.05). The time of root dentin exposure to the medicaments was similar (P> 0.05). The root dentin microhardness was lower in the teeth treated with the triple antibiotic paste or calcium hydroxide when combined with propylene glycol. The root dentin collagen in these treated teeth were also significantly degraded when viewed with Raman spectroscopy and energy dispersive x-ray spectroscopy, whereas the inorganic phase (dentin) remained unaltered. Samples exposed to the antimicrobial agents with water as a vehicle exhibited stronger microhardness and less degradation. CLINICAL SIGNIFICANCE: These ex vivo results suggest that the triple antibiotic paste and calcium hydroxide should be used with propylene glycol if a fast diffusion is desired or with water to avoid degrading the collagen and weakening the microhardness of the teeth. Clinical trials are needed of new formulations of medicaments with propylene glycol to disinfect teeth for regenerative endodontic procedures, to help strengthen the teeth to prevent the loss of children's permanent immature teeth by fracture following caries or trauma.

Impact of Dentin Conditioning and Sealer Modification With Chitosan-Hydroxyapatite Nanocomplexes on the Antibacterial and Mechanical Characteristics of Root Dentin.

INTRODUCTION: This study aimed to characterize the effectiveness of dentin conditioning with bio-mineralizable chitosan-hydroxyapatite precursor (CS-HA) nanocomplexes alone or associated with tricalcium silicate sealer (TCS/CS-HA) on the mechanical property and antibiofilm efficacy in root dentin. METHODS: Flow tests were performed following ISO6876:2012 specifications. Solubility was measured. Micromorphology was assessed using scanning electron microscopy (SEM). Nanohardness/elastic modulus were also determined. Fracture resistance was determined on lower premolars that were prepared, and randomly distributed among 7 groups (n = 8/group), including the control, CS-HA dentin-conditioning, and root canal-filled groups. Similar canal preparation/distribution procedure was followed to test the antibacterial effect on Enterococcus faecalis-infected roots. Descriptive statistics was used to report SEM findings. Flowability results were analyzed using paired t test. Multiple comparisons from solubility, fracture, and antibacterial assays were assessed by one-way analysis of variance-Tukey's tests. RESULTS: TCS/CS-HA showed optimal flow and no effect on solubility after immersion for 4 weeks (P > .05). TCS/CS-HA significantly increased nanohardness and elastic modulus (210 ± 11.3 MPa, 7.9 ± 0.9 GPa) compared with TCS (44.5 ± 7.8 MPa, 2.1 ± 0.3 GPa, P < .05). SEM revealed needle-shaped mineralized structures resulting in fewer voids and a well-adapted sealer-dentin interface in the TCS/CS-HA groups. NaOCl-EDTA irrigation resulted in reduced fracture resistance (444.34 N), whereas CS-HA dentin conditioning alone (928.28 N, P < .05) and CS-HA dentin-conditioning plus CS-HA/TCS resulted in higher fracture resistance (1134.06 N, P < .05). CS-HA dentin conditioning also reduced bacteria by 2.04 log (4.50 ± 0.43) from the initial bacterial load (6.54 ± 0.07, P < .05). There was further bacterial reduction when CS-HA-conditioned root canals were filled with TCS or TCS/CS-HA (0.00 to 0.98 ± 0.57, P > .05). CONCLUSION: Dentin modification with CS-HA increased the fracture resistance of root dentin, and decreased the residual bacterial burden. TCS/CS-HA potentiated the nanomechanical and physical properties of TCS.

Physicochemical properties and penetration into dentinal tubules of calcium hypochlorite with surfactants.

The aim was to assess the physicochemical properties and the penetration into dentinal tubules of calcium hypochlorite solution [Ca(OCl)2], with or without surfactants. The surfactants benzalkonium chloride, cetrimide, Tween 80 and Triton X-100 were mixed at different concentrations with sodium hypochlorite solution (NaOCl), Ca(OCl)2 and distilled water (control). Once the critical micellar concentration (CMC) of the surfactants in Ca(OCl)2 and NaOCl was determined, pH, free chlorine, surface tension and free calcium ions were evaluated. The penetration into dentinal tubules of NaOCl and Ca(OCl)2, with or without benzalkonium chloride and Triton X-100 [surfactants that promoted the lowest surface tension of Ca(OCl)2], was assessed using human premolars stained with crystal violet. The statistical tests were one-way ANOVA and Tukey's post-test, Kruskal-Wallis and Dunn's post-test, two-way ANOVA and Bonferroni's post-test, and t-test; depending on the assay. The addition of surfactants reduced the surface tension of NaOCl and Ca(OCl)2, and did not alter the pH or the free available chlorine of either solution. The addition of all surfactants increased the availability of free calcium ions in Ca(OCl)2, especially benzalkonium chloride. Ca(OCl)2 exhibited lower penetration into dentinal tubules than NaOCl, and the addition of surfactants did not improve the penetration of Ca(OCl)2, but did increase the penetration of NaOCl. It can be concluded that the addition of surfactants to Ca(OCl)2 did not increase the penetration into dentinal tubules, but it did promote lower surface tension, without changing the pH or free available chlorine values, and higher availability of free calcium ions in Ca(OCl)2.